Html Drop Down Menus by Vista-Buttons.com v5.0.0

CLUSTERED RIGGING SYSTEM FOR TOURING CABINETS

MEGS

SEQUENTIAL
  Html Drop Down Menus by Vista-Buttons.com v5.0.0 View/Print PDF
MEGS Inline Array System

Various sizes of ruggedly constructed overhead suspension trusses that adjust in width to accommodate different loudspeaker cabinets and horizontally aims entire columns of loudspeakers, up to 2100 lb./955 Kg per column.

The MEGS telescoping control arm that links trusses together and sets the relative horizontal angle (pan angle) between two trusses.

Specialized side pivoting components install into the sides of loudspeaker cabinets (at the loudspeaker’s center of gravity) and offer an assortment of suspension points, which can alter the positioning of the loudspeaker in space and align the acoustic wavefronts of the loudspeakers.



SPECIFICATIONS:

Material: Structural Alloy Steel Tubing
Finish: Powder coat
Color: Flat black
Working Load Limit: 2100 lb./954 Kg
Design Factor: Design ratio: 5:1

MEGS In-line
Array System

Sequential loading

The MEGS Pivotal Flying System quickly and effortlessly suspends and aims full, large-venue loudspeaker clusters into both horizontal and vertical arrays to suit a multitude of splay angles and column gaps in order to accommodate severe down tilts. This makes for an ideal loudspeaker rigging system for large-scale facilities such as, concert halls, stages, stadiums and sport arenas. The MEGS system is comprised of three basic components;



Megs Image
e   e2

Truss Assembly

The MEGS truss is a substantial overhead weldment that supports several loudspeaker cabinets in a vertical column, up to 2100 lb. with a 5:1 design factor. Adjustable pivoting joiner arms help accommodate a range of cabinet widths and a selection of pick up points allow for lateral balancing.

  

Pull back extension beam

Secure this beam to the back of the MEGS Truss assembly to provide a pull back point for the loudspeakers suspended underneath the truss. The MEGS-PBS 27’-0” adjustable tensioning strap sets the down tilt angles.
TRUSS ASSEMBLY A
Inch/mm		 B
Inch/mm		 C
Inch/mm		 D
Inch/mm		 E
Inch/mm		 F
Inch/mm		 G
Inch/mm		 H
Inch/mm
MEGS-216-T 20.92/531 15.42/392 10.79/274 8.54/216 2.06/52 9.56/243 7.00/178 12.59/319
MEGS-356-T 30.23/768 21.23/539 16.5/419 14.00/356 2.06/52 9.56/243 7.00/178 12.59/319
MEGS-520-T 42.13/1070 27.13/689 22.5/572 20.5/520 2.06/52 9.56/243 7.00/178 12.59/319
MEGS-575-T 44.12/1121 29.12/740 24.5/622 22.5/571 2.06/52 9.56/243 7.00/178 12.59/319
MEGS-760-T 60.63/1540 36.63/930 30.00/762 30.00/762 2.06/52 9.56/243 7.00/178 12.59/319
MEGS-915-T 72.63/1845 42.63/1032 36.00/914 36.00/914 2.06/52 9.56/243 7.00/178 12.59/319



SPLAY STRUT A
Inch/mm		 B
Inch/mm		 C
Inch/mm		 D
Inch/mm
MEGS-216-TB 9.79/249 15.42/392 2.00/50.8 2.00/50.8
MEGS-356-TB 21.73/552 14.51/369 2.00/50.8 2.00/50.8
MEGS-520-TB 33.64/854 21.61/549 2.00/50.8 2.00/50.8
MEGS-575-TB 38.74/984 26.71/678 2.00/50.8 2.00/50.8
MEGS-760-TB 49.13/1248 31.08/789 2.00/50.8 2.00/50.8
MEGS-915-TB 66.61/1692 40.15/1019 2.00/50.8 2.00/50.8

megs

Adjustable splay strut

Use this adjustable strut in between truss assemblies and speaker columns to set and lock specific splay angles. Quick release pins join the clevis ends to the truss assemblies making for quick set ups and tear downs.

megs   When a loudspeaker cluster combines the MEGS Pivotal Series side fittings and MEGS Pivotal Series pull back clips, the acoustic wavefronts of the enclosures remain in alignment while down tilt angles are adjusted easily and with minimal tension in the pull strap. Additionally, the MEGS Pivotal Series can be installed to allow the loudspeaker to be arrayed in an upright orientation or an inverted orientation.  
megs   megs  

(C) Quick release, in-line linear link

This suspension link snaps and locks inside the Pivot Connector and provides a load-rated tilt rotation point connection for wire rope above and below the cabinet.

  

(A) Quick release side-mounted pivot connector

Eliminate compounding of multiple loudspeakers cabinet’s by installing two Pivot Connectors into the sides of the cabinet at the center of gravity. The column loading will then transfer into the rigging system and allows an independent tilt rotation. All hardware is included.

  
megs   megs  

(D) Quick release, in-line spherical link

This suspension link snaps and locks inside the Pivot Connector, provides a load-rated tilt rotation point connection for wire rope above and below the cabinet. Multiple attachment points, in a cam-like fashion further allow the loudspeaker to be positioned forward and backward, relative to other loudspeakers in the column to balance their acoustical wavefronts.

  

(B) Pull back strap handle

Install this bracket to the lower back of the loudspeaker cabinet to provide a compatible and sturdy pull back point for the MEGS-PBS tensioning strap assembly. All hardware is included.